在线红外水分仪JZ-31SY

JZ-31SY在线红外水分仪

JZ-31SY是一种安装于生产流水线现场，用于在线检测物料水分的近红外增强型精密仪器设备。

特征：Features:

稳定可靠，直流低压供电检测技术

Stable and reliable, DC low-voltage power supply detection technology

带有过流过压保护、EMC、EMI过滤，交流220V50HZ/直流24V可选

With over-voltage and over-voltage protection, EMC, EMI filtering,

AC 220V, 50HZ/DC 24V optional

带有电源软启动功能，保护电流冲击，从而延长光源使用寿命

With power soft start function, it can protect current impact,

 thus extending the service life of light source

一体化RS485接口芯片，具备短路、过载保护

Integrated RS485 interface chip, with short circuit and overload protection

带有一键快捷设置功能，无需繁琐设置，放大倍数可调，参数设置灵活简单

With one key shortcut setting function,No need for complicated settings, adjustable magnification, flexible and simple parameter settings

三路常规通讯口：type-c接口（可直连接上位机软件）+ MODBUS RTU+4-20mA（可选配增加最大10个口）各一路

Three conventional communication ports: Type-C interface (can directly connect to upper computer software)+MODBUS RTU+4-20mA (can optionally add up to 10 ports), one each

特殊端口可选配西门子工业仪太网PROFINET IO总线

Special ports can be optionally equipped with Siemens Industrial Instrument Ethernet PROFINET IO bus

开关信号上下限、故障报警晶体管输出（DC24V10W），IO启/停测量信号功能、参数清零功能

Switching signal upper and lower limits, fault alarm transistor output (DC24V10W), IO start/stop measurement signal function, parameter reset function

LED数码管显示、简便直观

LED Digital tube display, simple and intuitive

技术参数   ：TechnicalParameters:

测量范围   :  0.1%-100.00%（物料不饱和无渗水情况）

Measuring range: 0.1%-100.00% (material no water seepage conditions)

显示分辨率   :  0.01%

Display resolution: 0.01%

测量精度   :  ±0.2%（根据物料特性和应用环境而定）

Accuracy: plus or minus 0.2% (according to the material properties and the application environment and decide)

测量通道   :  60

Measurement channels:60